What things cost, what survives our winters, and what to check before you order. Written from the questions we get asked most across the counter — no filler, no affiliate links.
Installed crown moulding typically runs $7–$16 per linear foot, but the profile size, material and ceiling height move that number more than most people expect. Here is what drives the price.
Read guide
Manufactured stone veneer is cheaper and lighter, but its colour is surface-applied and our rain is relentless. Here is how the two materials actually age on a BC exterior.
Read guide
Most BC municipalities west of Hope require a 10mm drained cavity behind cladding. It is the single detail that decides whether your stone wall lasts thirty years or leaks in five.
Read guide
Fluted and slatted panels are the fastest way to add depth to a flat elevation. They are also frequently used in exactly the wrong place. Here is how to tell the difference.
Read guide
Structural 2cm porcelain can be pedestal-set on a rooftop, laid on gravel, or mortared down. Each method has a different failure mode. Here is how to choose.
Read guide
Colour is the last decision, not the first. Format, joint and how the stone behaves wet matter more — especially in a climate that keeps facades damp half the year.
Read guide
Pre-war profiles rarely match anything currently stocked. Here is how to identify what you have, find a workable equivalent, and handle the transitions where old meets new.
Read guide
Three things turn a vague chat into a useful quote: daylight photos of the whole elevation, rough dimensions, and a clear sense of what is already fixed.
Read guideBring your photos and dimensions in. Twenty minutes with samples in hand usually settles a question that has been open for weeks.
